1) Storage of drinking water (drinking water)
2) rainwater collection and storage
3) Emergency water storage
4) pump chambers
5) Acid effluents and alkalis / Storage and treatment solution
6) hospital, buildings, construction site, school and other place
There is no limit on size (available tank height is up to 5mH) The panel size, respectively, is 1m x 1m *, 1m x 0.5m, 0.5mx 0.5m. When an area that is used for the location of a tank has restricted access (for example, door or gate) and therefore, a one-piece warehouse cannot be accessed, the only solution on the left is a panel warehouse and sealed, screwed and assembled in the area once through restricted access, this allows a tank with a greater storage capacity to be used in the same area and can be much larger than the access to the area will allow.
Section tanks are available plain or insulated, and are constructed from a number of GRP panels that are screwed together and sealed at the site, these tanks can be completely with internal flange that only requires only 50mm around the tank to assemble, also the tanks that externally flange with internal or external sectionals flange base, all come with sectional cover and the tank inspection hatch of the cross-section with the internal bases require a completely flat support base, whereas a section based on outer flange can be mounted on pillars or RSJ 's that are the same level and flat, but must be a minimum of 500mm from the ground.
Ideal key to the tanks found through restricted access Insulated tanks available with the HCFC free foam. 1000 * 1000mm panels available as standard, panel sizes available in request Tanks up to 3m high without the restriction of length and width SMC Water Tank Plug-in is a new type of products widely used throughout the world. The tank addresses the problems of heavyweight, leakage, and moss covering in concrete tanks, as well as corrosion and water pollution caused by the antioxidant layer fell on steel sheet tanks. It has high-quality water, no leaks, lightweight, nice appearance, long service life, and convenient installation. The product is compatible with the 7th Year Five Key Programs for Science and Technology Development and is an Outreach Project During The 8th five year period.
SMC Water tank plug-in is applicable to public buildings such as public institutions, homes, hotels, restaurants, and schools. It can also serve as an indispensable element in facilities for water storage, fire water and water quality used by food, medicine, health, culture and farming industries.
High-performance resin and fiberglass materials are used to guarantee product quality. Uses the special sealing strips and the bolted joint for easy assembly. It is water and tight air. Internal Tension - High Mechanical rod Structure makes the Property. Standard molding Pressure plates are good for mounting free lifting operations without. Fitness and Celebration of Capacity Are Easy to Meet Customers Need.
The Capacity Celebration Ratio For Deadweight Is 1: 0.1-0.2 (For Concrete Tank, The Ratio Is 1: 1). The Own weight of the SMC molding water tank is insignificant during the design process. May Prevent Water Supply From Secondary Pollution In Which There Is No Algae Or Bloodworms They will grow. It can be washed every 6 months and the cleaning cost decreases.
SMC tank installation
Step 1. Install the steel foundations in concrete leveling foundations. Step 2. Align the GRP panels to be pre-assembled. Step 3. Place rubber sealing paste ready to use roller between panels. Step 4. Connect the panels with bolts and nuts. Step 5. Bottom panel of the position of the sections and finish the base of the tank. Step 6. Position three sides of the tank. Step 7. Place and fix the roof panels and, if necessary, roof support tubes and plates. Step 8. Install the reinforcement if necessary. Step 9. Close the tank with the fourth side. Step 10. Finish the internal or external reinforcement. Step 11. Fill and test.
1. Please do not store water above 70 ° C or other liquids (chemicals, petroleum and so on). 2. Water tank should be kept away from fire. 3. Prevent contaminants and submerge them outside. 4. Use soft appliances to clean. As for the new water tank, clean twice before using.